Digitally and independently operable attenuators from 0 to -31.5dB (in steps of 0.5dB).
#Rf toolbox manual#
After troubleshooting and recovery, a manual reset can be made. Real-time indication of power consumption per input. 1,200mA power supply for the RF toolbox Preamp (LED indication for available voltage). Booster power supply (antenna input): + 13V max.The OLED window provides the following information and settings:
#Rf toolbox Pc#
The RF toolbox XL and connected RF toolbox booster can be controlled by PC via USB with the free RF toolbox software. An RF toolbox XL can communicate with a maximum of 32 RF toolbox boosters or LPDA antennes. With the RF-toolbox XL, the level of the radio signals can be closely monitored and can be optimally adjusted remotely via the RF toolbox booster. The RF toolbox booster is an antenna amplifier that can control the level of individual antennas within a system and, for example, can compensate for the cable lengths for each antenna separately. The RF-toolbox XL provides communication with the RF-toolbox booster or LPDA antenna and also power. This makes the RF toolbox XL the ultimate nerve center for a set-up under demanding conditions with a larger number of receivers. Each receiver therefore gets exactly the right signal at a strength that eliminates noise and intermodulation distortion.
This frequency range can be set by the user. The gain and bandpass filter with a bandwidth of 32MHz can be set for each output of the RF toolbox XL. The RF-toolbox XL is supplied with 2×4 or 2×8 output cards. Known interference signals for wireless microphone systems are WiFi and 4G networks in the immediate vicinity and the digital video signal DVB-T that is distributed over the air. More selective to prevent intermodulation and to suppress signals from other sources. Strengthen to bridge greater distances and obstacles. Attenuate to prevent intermodulation and to lower the noise floor. This allows the radio signal from the antennas to be attenuated or increased as filtered. Essential in that process are the gain control, the auto gain option and the digitally adjustable bandpass filter. However, the input card has functions which can optimize the signal. In that sense, it acts as a regular antenna splitter. The RF toolbox XL has two inputs and two times eight outputs with N-connectors. The RF toolbox XL is an addition to existing wireless receiver systems and is used as a high-quality main antenna distribution center for receivers of all brands. The inputs and outputs offer advanced options for fine tuning the antenna signals. The RF-toolbox XL is an antenna splitter with a number of indispensable extras when it comes to stable and interference-free reception of the signals from wireless microphones.
0 kommentar(er)
